The Royal System has everything
you need to protect your home and family. It offers unbeatable
value and is expertly fitted by one of a team of independent
installation engineers. The complete system includes the following
equipment.
1
x Veritas 8c Control Panel
This
is located near your entry point for convenient use, it
measures 246mm x 185mm.
3
x Texecom Reflex PIRs
These
are used to protect areas such as lounge, kitchen and
landing etc.
2
x Surface Door Contacts
These
are fitted to your external doors (Restrictions Apply).
1
x Panic Button
Protects
you and your family even when the alarm is unset.
1 x Texecom Odyssey
1e bell box
This
is a 109dB Polycarbonate bell box complete with it's own
strobe and battery back-up.
1
x Decoy Bell Box
This
is located externally, usually to the rear of the property
(not shown).
1
x 1.2ah Battery Back-Up
This
will normally run the system for up to 6 hours.
Additional
Features
Full
Set
When
leaving the property you simply press the 'FULL' button
and leave. Once all the zones are clear the system will
set and the blue strobe will flash several times to confirm.
Part
Set 1
By
pressing the 'PART' button the system will automatically
set for night time. this can omit zones that would otherwise
trigger whilst in bed, i.e. landing PIRs, bedroom PIRs
etc.
Part
Set 2
By
pressing the '2' then 'PART' buttons the system will automatically
set for a 2nd pre-determined setting. This would normally
be used to arm doors/windows while allowing the occupant
to walk freely around the property.
Panic
Button
Whilst
the alarm is set or unset you can activate the siren via
the panic button. this would normally be installed in
a bedroom or by the front door.
Auto
Reset
If
your alarm triggers it will ring for approximately 10
minutes. After this period it will reset and re-arm.
Chime
Zones
with door contacts attached can be programmed to chime
when the system is unset. This means if you have left
the door unlocked and someone tries to enter, the control
panel will give a double beep to alert you.
